6 Haziran 2009 Cumartesi

CONFIRMED KEY COMBINATIONS FOR PC and LAPTOP FACTORY SYSTEM RECOVERY!

CONFIRMED KEY COMBINATIONS FOR PC and LAPTOP FACTORY SYSTEM RECOVERY!

Hi,
I am still living problems with running recovery installations on laptops. New generation laptops doesn`t come with recovery cd`s but comes with recovery partitions. Sometimes these partitions deleted by inexperienced technical staff or by you for installing new operating system. But sometimes fortunately these partitions were not deleted or computer is never been serviced. This is very good situation for recovery process because you can save your time by using this bartition to install operating system.
But, most asked question is "How do I access and start recovery process on this computer". I am tired to find suitable key to start this process in windows and now I am starting this blog to list computers and their recovery keys. I have very bad grammar with English, please guys help me for better introduction.

Now here are the first additions. YOU HAVE TO PRESS THESE KEYS DURING BOOT UP PROCESS.

SCENARIO: YOU HAVE A RECOVERY PARTITION BUT YOU COULDN'T FIND F SOMETHING BUTTON OR BUTTONS TO START YOUR RECOVERY INSTALLATION AND YOU CAN NOT SEE REPAIR COMPUTER OPTION UNDER F8 MENU. THE REASON IS PROBABLY YOU HAVE YOUR WINDOWS INSTALLED MANUALLY LAST TIME. YOU STILL WANT TO ACCESS RECOVERY PARTITION BECAUSE YOU WILL NOT SPEND ANY MORE TIME TO DOWNLOAD AND INSTALL DRIVERS AND SOME EXTRA SOFTWARE. I THINK ONE OF YOUR LAST CHANCES TO START WINDOWS INSTALLATION FROM RECOVERY PARTITION IS TO MAKE IT ACTIVE DISK. IF YOU ABLE TO GO INTO DISK MANAGER UNDER MANAGEMENT CONSOLE, YOU CAN TRY TO ACTIVE HIDDEN PARTITION TO START FROM IT. BE CAREFUL IF YOU MAKE IT ACTIVE, YOUR COMPUTER WILL START OR ATTEMPT TO START FROM RECOVERY PARTITION EVERYTIME SO YOUR CURRENT WINDOWS WILL NOT RUN UNTIL YOU SET BOOT DISK AS ACTIVE. YOU CAN USE ERD COMMANDER TO DO THOSE CHANGES.

PLEASE ADD YOUR KNOWLEDGE
________________________________________________
COMPAQ PRESARIO V6000 -
PRESS F11 DURING REBOOT.
________________________________________________

SONY VAIO PCG-7H1M - PRESS F10 DURING REBOOT.
________________________________________________
E-SYSTEM EI 3103 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list . Supported by PC-WORLD.
________________________________________________
SAMSUNG NP R60Y (R60 PLUS) - PRESS ALT + F4 DURING REBOOT.
________________________________________________
ACER ASPIRE 5920 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
ASUS X58L - PRESS ALT + F9 DURING REBOOT.
________________________________________________
ACER ASPIRE 6530 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
IBM THINKPAD T42 - PRESS BLUE "THINKVANTAGE" BUTTON on top of your laptop keyboard DURING REBOOT. I suggest you not to use this recovery because the recovery process is taking around 3 hours to complete.In this process each of the useless IBM tools are installing into your computer. I suggest you to install windows xp/vista in 30-45 minutes and install drivers. Your computer will be faster. While installing windows, download drivers from IBM support web site from another computer if you can.
________________________________________________
SONY VAIO VGN-NR21J/S - PRESS F10 DURING REBOOT. Please prepare popcorn, a coke and a dvd while you recovery installs. It is going to take two and a half hour. (I am serious!)
________________________________________________
PHILIPS X58 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list. Supported by PC-WORLD
________________________________________________
IBM THINKPAD X60s - PRESS BLUE "THINKVANTAGE" BUTTON on top of your laptop keyboard DURING REBOOT.
________________________________________________
DELL DIMENSION 5000 DESKTOP PC - PRESS CTRL + 11 DURING REBOOT. (Quickest recovery ever!)
________________________________________________
ACER ASPIRE 7520G - PRESS ALT + F10 DURING REBOOT.
________________________________________________
ACER ASPIRE 9300 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
SONY VAIO VGN-NS20J - PRESS F10 DURING REBOOT.
________________________________________________
HP PAVILION DV2000 - PRESS F11 DURING REBOOT. (If F11 does not work and if you can run a windows on the machine, go on the computer management console by right click and choose manage from list and go to disk management and right click on recovery partition then choose as active partition then restart computer and then press F11 again. It worked on my one.)
________________________________________________
ACER ASPIRE 5315 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
PACKARD BELL HERA C - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list.
________________________________________________
E-SYSTEM 3089 - PRESS F10 DURING REBOOT. Supported by PC-WORLD
________________________________________________
HP 530 - PRESS F11 DURING REBOOT.
________________________________________________
PACKARD BELL IMEDIA 2215 - PRESS F11 DURING REBOOT.
________________________________________________
FUJITSU SIEMENS AMILO LI 1705 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list.
________________________________________________
HP PAVILION DV9700 - PRESS F11 or F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list.
________________________________________________
DELL INSPIRON 1525 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list.
________________________________________________
ACER ASPIRE 5735 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
TOSHIBA L300 - 20W - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list.
________________________________________________
ASUS EEE PC 1005HA - PRESS ALT + F9 DURING REBOOT.
________________________________________________
GATEWAY MA7 - PRESS ALT + F11 DURING REBOOT. (It asked me for recovery cd which i don't have.)
________________________________________________
HP PAVILION TX2000 - PRESS F11 DURING REBOOT.
________________________________________________
PACKARD BELL IMEDIA 1328/1 - PRESS F11 DURING REBOOT, then choose Ms-Dos file recovery (second option on the screen).
________________________________________________
COMPAQ PRESARIO CQ60 - PRESS F11 DURING REBOOT.
________________________________________________
ADVENT 5431 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list. Supported by PC-WORLD
________________________________________________
SAMSUNG NP N130 - PRESS ALT + F4 DURING REBOOT.
________________________________________________
SAMSUNG N150 - PRESS ALT + F4 DURING REBOOT.
________________________________________________
MSI U90 - PRESS F3 DURING REBOOT.
________________________________________________
ADVENT 4213 - PRESS F10 DURING REBOOT.
________________________________________________
TOSHIBA NB200 - PRESS F8 DURING REBOOT then choose REPAIR COMPUTER from the startup list. Later choose TOSHIBA HDD Recovery from menu.
________________________________________________
ACER ASPIRE 5630 - PRESS ALT + F10 DURING REBOOT.
________________________________________________
HP 6735s - PRESS F11 DURING REBOOT.
________________________________________________
PACKARD BELL EASYNOTE S4 - PRESS F10 DURING REBOOT.
________________________________________________
PACKARD BELL HERA G HGL1 - PRESS F11 DURING REBOOT. But if you press F8 during the restart you can access windows recovery console which it does not help you at all.

A MICROSOFT ARTICLE
http://www.w7forums.com/windows-7-recovery-partition-t4534.html

Acer eRecovery:
  • Plug in the AC adapter and battery, then turn the system on
  • Immediately, press ALT on the keyboard and start tapping F10. Continue holding ALT and tapping F10 as the unit boots up.
  • A screen stating "Starting Acer Erecovery" should appear. (Release ALT and stop tapping F10 at this point)
  • There will be 4 options:
    1. Restore system to factory default
    2. Restore system from user backup
    3. Restore system from cd/dvd
    4. Exit
Asus System Recovery:
  • Turn on the notebook, Press F9 when you see the ASUS logo, and then choose the second item to recover OS to the first partition.
  • Press [F9] during bootup (requires a Recovery Partition)
  • Press [Enter] to select Windows Setup [EMS Enabled]
  • Read the “ASUS Preload Wizard” screen and click Next.
  • Select a partition option and click Next.
  • Follow the on-screen instructions to complete the recovery process.
Dell Restore Partition:
  • Turn on the computer.
  • When the Dell splash screen appears during the computer startup process, press and hold and then press . Then, release both keys at the same time.
  • In the Dell PC Restore by Symantec window, click Restore. Alternatively, press to highlight Restore, and then press .
Gateway Recovery Partition:
  • Turn on your computer, then press Alt+F10 during startup. Gateway Recovery Management opens.
  • Click on Restore system from factory default.
  • Click on Next. Your hard drive’s original, factory-loaded contents are recovered. This process will take several minutes.
HP / Compaq System Recovery:
  • Turn on the comptuer and repeatedly press F10 at the HP logo until the recovery screen appears.
  • When the recovery screen appears, press "Next" and then "Yes" to perform a non-destructive recovery. To perform a destructive recovery, click "Advanced" and then "Yes".
  • After the recovery is finished, the computer will reboot.
Sony Recovery Partition:
  • Turn off your computer.
  • Restart your computer.
  • When the VAIO logo appears on the computer's screen, briefly press the F10 key on the computer keyboard.
  • The VAIO Recovery Wizard appears.
    4. Click Next.
    5. Select one of the available menu options.
Toshiba Recovery:
  • Make sure the computer is turned off.
  • Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays.

2 yorum:

iddqd dedi ki...

How do I run a System Recovery?
http://www.mytoshiba.com.au/support/item/230
Computers manufactured from mid 2007 are no longer provided with recovery disks for your operating system. To make your recovery data easier to access Toshiba are now providing your recovery media via a hidden partition that is built into your Hard Disk Drive. You can access this following the instructions below.

You may still use your Recovery Disks to reinstall your computer back to your Factory Default Settings. Instructions are provided.

System Recovery from Hard Disk Drive

NOTE: Please ensure you have backed up all important information from your system before proceeding with this process.

ALL DATA WILL BE ERASED ON YOUR HARD DRIVE IF YOU PROCEED. YOU WILL NEED TO ENSURE THAT YOU HAVE THE POWER ADAPTER PLUGGED IN. DO NOT SWITCH OFF OR RESTART YOUR COMPUTER DURING THIS PROCESS.

1. Hold down the power button for 10 (ten) seconds to switch off your machine.

Please note: Holding down the power button on the machine forces it to switch off. Any unsaved data will be lost.

2. Press and hold the 0 (zero) key and at the same time, press the power button once to switch on your notebook.

3. When the machine starts beeping; release the 0 key.

4. When prompted by the warning screen; click Yes to continue with the system recovery.

5. Select Recovery of Factory Default Software; click Next.

6. Select Recover to out-of-box state; Click Next again.

7. Please read and acknowledge this last warning screen.

8. Click Next to start recovery

System Recovery from Disk

NOTE: Please ensure you have backed up all important information from your system before proceeding with this process.

ALL DATA WILL BE ERASED ON YOUR HARD DRIVE IF YOU PROCEED. YOU WILL NEED TO ENSURE THAT YOU HAVE THE POWER ADAPTER PLUGGED IN. DO NOT SWITCH OFF OR RESTART YOUR COMPUTER DURING THIS PROCESS.

1. Insert Recovery Disk 1 into CD/DVD Drive

2. Hold down the power button for 10 (ten) seconds to switch off your machine.

Please note: Holding down the power button on the machine forces it to switch off. Any unsaved data will be lost.

3. Press and hold the C key and at the same time, tap the power button once to switch on your notebook.

4. When the machine starts beeping; release the C key.

5. When prompted by the warning screen; click yes to continue with the system recovery.

6. Select iRecovery of Factory Default Software; click Next.

7. Select Recover to out-of-box state; Click Next again.

8. Please read and acknowledge this last warning screen.

9. Click Next to start recovery.

Unknown dedi ki...

Nice and quite informative post. I really look forward to your other posts.

Lenovo - 12.5" ThinkPad Notebook - 4 GB Memory - 500 GB Hard Drive - Black

Lenovo - 14" ThinkPad Edge Notebook - 4 GB Memory - 500 GB Hard Drive - Matte Black (627156U)